Contact me if you would like to discuss a custom order, get a shipping estimate, or if you have questions about one of my available pieces.

Inventory changes weekly so check back often! Follow me on Facebook and Instagram to get updates on newly finished pieces and new inventory.

SUBSCRIBE to get notified when new inventory arrives!


286 Sunset Park Drive
Herndon, VA, 20170
United States

Martha Leone Design. A furniture redesign company specializing in turning each piece of furniture into a sophisticated statement piece with the use of paint and design. This approach produces versatile pieces that are relevant, even as your taste evolves over time.


Martha Leone Design: The blog is where I share thoughts on the creative process and share lots of pictures of each finished piece of painted furniture. Critiques are always welcome!

Knapp Dresser

Martha Leone

I found this dresser on craigslist a couple of weeks ago. The drawer joints were unlike anything I've seen before. After a bit of research online, I discovered that these corners, consisting of pins and crescent joints, were the first known machine-generated drawer joints in the industrial revolution age. They were called Knapp Joints after the inventor. This joint replaced the hand cut dovetail joints and was used from about 1870 - 1900. Used in furniture factories, the Knapp machine made it possible for a skilled cabinet maker to turn out 15 - 20 drawers per day. The drawer department finally caught up with the efficiency of other departments in the factory. But by 1900 a machine-made dovetail joint was perfected, completely replacing the Knapp Joint.

So if you find a dresser with these distinctive rounded joints, you can be sure the piece was constructed between 1870-1900 and probably by the Knapp Dovetailing Company in Northhampton, Mass.


Enough of the history lesson... on to the furniture. This piece had so many angles, cuts, details that a simple beautiful paint job was the only thing it needed. Here's what I did:

1. Sanded 2. Primed with Benjamin Moore All Purpose Primer (oil based) 3. Painted two coats of Behr "Perfect Storm" 4. Lightly distressed 5. Sealed with two coats of wipe-on poly with a satin finish 6. Inside of drawers and knobs were painted a creamy white

Lesson learned: Do you see the small white specs on the drawer below? Well, I ran out of the lint-free pads used for the application of stain and poly so I used an old sock! Hence the ugly specs. Take my advice... cutting corners usually doesn't yield a good result.

Before shot:

Follow Me on Pinterest

By the way, this is available at my etsy shop 

Linking up to these parties:

IhookedupwithHoHlamespice Furniture Feature Fridays

PhotobucketFunky Junk InteriorsIt's OverflowingToo Much Time On My Hands Mod Vintage LifeBoogieboard CottageDIY Show Off Primitive and ProperPhotobucket/My Uncommon Slice of Suburbia